Inserting/removing the saw
blade
WARNING!
m
Al ays s itch the product off
remove the battery pac
let the product cool down before
making any adjustments!
CAUTION! Risk of injury!
m
Sa blades
and become hot during use.
Always wear protective gloves
when handling saw blades.
CAUTION! Risk of injury!
m
Do not use any blunt, bent or
u
damaged sa blade
Al ays install a suitable sa blade
u
/
for the job.
[
]
[
]
NOTE
For certain work, the saw
u
blade
/
can also be inserted
[
]
[
]
after turning it by 180° (Fig. G).
Inserting the saw blade
(Fig. F)
1. Turn the chuc ring
counter-clockwise direction.
2. Insert the sa blade
sa blade holder
3.
elease the chuc ring
the chuck ring return to the original
position.
4.
efore use Pull on the sa blade
to check if the saw blade is inserted
[
]
safely and tightly.
Removing the saw blade
1. Turn the chuc ring
counter-clockwise direction.
and
[
]
/
can be sharp
[
]
[
]
/
.
[
]
[
]
in a
[
2 ]
/
into the
[
]
[
]
.
3 ]
[
and let
2 ]
[
[
in a
[
2 ]
2. Pull the sa blade
sa blade holder
3.
elease the chuc ring
the chuck ring return to the original
position.
Operation
S itching on/o
CAUTION! Risk of injury!
m
Always wear protective gloves
when handling or working with
the product.
CAUTION! Risk of injury!
m
Before switching on the product:
u
nsure the sa blade
contact with the workpiece.
Ensure your stance is stable. Always
u
hold the front handle
handle
[
7 ]
while working (Fig. H).
Keep your hands away from the saw
u
blade
/
[
]
operation.
NOTE
The on/off s itch
u
locked in the ON position.
(Fig. I)
Switching on
1. Push the s itch loc
or right side to release the switch lock.
2. Press and hold the on/off s itch
3. Regulate the speed as required (see
/
"Speed control").
]
S itching o
1.
elease the on/off s itch
2. The s itch loc
the original position.
/
out of the
[
]
[
]
.
3 ]
[
and let
[
2 ]
/
is not in
[
]
[
]
and the rear
9 ]
[
firmly ith both hands
when the product is in
[
]
cannot be
[
6 ]
in on the left
[
5 ]
.
6 ]
[
moves back into
5 ]
[
GB/IE/NI/MT
.
6 ]
[
17