Parkside Performance PSSAP 20-Li E5 Bedienungsanleitung Und Originalbetriebsanleitung Seite 13

Power tool use and care
a) Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the
switch does not turn it on and
o . Any power tool that cannot be
controlled with the switch is dangerous
and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack, if
detachable, from the power tool
before making any adjustments,
changing accessories, or storing
power tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained
users.
e) Maintain power tools and
accessories. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that ma a ect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the po er tool for operations different
from those intended could result in a
hazardous situation.
h) Keep handles and grasping surfaces
dry, clean and free from oil and
grease. Slippery handles and grasping
surfaces do not allow for safe handling
and control of the tool in unexpected
situations.
Battery tool use and care
a) Recharge only with the charger
speci ed the man act rer. A
charger that is suitable for one type of
battery pac may create a ris of fire
when used with another battery pack.
b) Use power tools only with
speci call designated atter
packs. Use of any other battery packs
may create a ris of in ury and fire.
c) When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins, keys,
nails, screws or other small metal
objects, that can make a connection
from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
d) Under a si e conditions li
be ejected from the battery; avoid
contact. If contact accidentally
occ rs sh
contacts eyes, additionally seek
medical help. Liquid ejected from the
battery may cause irritation or burns.
e) Do not use a battery pack for
tool that is damaged or modi ed.
Damaged or modified batteries exhibit
unpredictable behaviour resulting in
fire explosion or ris of in ury.
f) Do not expose a battery pack or tool
to re or e cessi e temperat re.
xposure to fire or temperature above
+130 °C may cause explosion.
id ma
ith ater. I li id
GB/IE/NI/MT 11