Parkside Performance PSSAP 20-Li E5 Bedienungsanleitung Und Originalbetriebsanleitung Seite 11

NOTE
The vibration emission values and
u
the noise emission values given
in these instructions have been
measured in accordance with a
standardised test procedure and can
be used for comparison of the power
tool with another tool.
The specified total vibration values
u
and the noise emission values can
also be used to make a provisional
load estimate.
WARNING!
m
Depending on the manner in which
u
the power tool is being used and,
in particular, the kind of workpiece
being worked, the vibration and
noise emission values can deviate
from the values given in these
instructions during actual use of the
power tool.
Try to minimise exposure to vibration
u
and noise. Examples of measures
to reduce vibration include wear-
ing gloves when using the tool and
limiting working time. All parts of the
operating cycle must be taken into
account (e.g. times when the power
tool is s itched off and hen it is
running idle in addition to the trigger
time).
General safety
instructions
˜ General power tool safety
warnings
WARNING!
m
Read all safety warnings,
instructions, illustrations and
speci cations pro ided
this power tool. Failure to follow
all instructions listed below may
result in electric shoc
or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
Work area safety
a) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in
explosive atmospheres, such as in
the presence o
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
ith
fire and/
amma le li ids
GB/IE/NI/MT 9