Calling Up Programs; Saving Programs - Hettich EBA 280 Bedienungsanleitung

15.2

Calling up programs

 Press the key.
PROG
PROG RCL : Program location of the
displayed centrifugation parameters.

 With the keys, set the program location
whose centrifugation parameters are to be
displayed.

 Press the key.
START
The centrifugation parameters are
PULSE
displayed.
15.3

Saving programs

 Press the key twice.
PROG
PROG STO : Program location where the
centrifugation parameters are stored.

 With the keys, set the program location
where the centrifugation parameters are
to be stored.

 Press the key.
START
The centrifugation parameters are stored
PULSE
at the program location.
Example:
RPM display (RPM)
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
Example:
RPM display (RPM)
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
EN
Example:
RCF display ( RCF )
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
Example:
RCF display ( RCF )
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
61/165