Hettich EBA 280 Bedienungsanleitung Seite 60

EN
 Press the key to activate the RPM display
(RPM) or the RCF display ( RCF ) as
RCF
needed. The LED above the key is
illuminated if the RCF display ( RCF ) is
activated.

 Keep pressing the key until the desired
centrifugation parameter is displayed.
Example: t/min : Runtime, minutes.

 Set the desired value with the keys.

 Input all the desired centrifugation
parameters in succession.


 Press the key until the following is
displayed:
PROG STO : Program location where the
centrifugation parameters are stored.

 Set the desired program location with the
keys.

 Press the key.
START
The centrifugation parameters are stored
PULSE
at the program location.
60/165
Example:
RPM display (RPM)
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
Example:
RCF display ( RCF )
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s