VEVOR SVM10 Bedienungsanleitung Seite 9

Figure A
IMPORTANT: When powering-up components, you can increase the life
of power switch in the tool if you first press the switch, then contact the
tip to the component. The arcing will take place at the tip instead of the
contacts of the switch.
7. Auto Circuit Breaker
The tool is short-circuit protected. Its internal circuit breaker will trip if it
becomes overloaded. The circuit breaker is a valuable test tool as well
as a safety measure to protect the tool from overload.
When circuit breaker tripped, all other functions of the tool are still active,
which means you can still probe a circuit and observe the voltage
reading. When the circuit breaker is tripped, the tool will NOT be able to
conduct battery current to the tip even when the power switch is pressed.
Intentionally tripping the breaker and using the tool to probe can be
considered an added precaution against accidental pressing of the
power switch.
8. Test Modes
There are five modes to diagnose the electrical systems, which can be
accessed by depressing the Mode Button and cycling through each one.
- 7 -