Ruris RX Explorer 1500M Handbuch Seite 25

EN
measures to ensure their own safety and the safety of others, especially on slopes or rough, slippery and
unstable terrain.
e) Pay special attention to the warning labels on the machine and its accessories and follow them strictly.
f) If the user feels tired or sick, or is under the influence of drugs, alcohol or substances that can impair
reaction and attention, he must not use the machine.
g) If you notice abnormal vibrations during operation, stop the engine immediately and check the condition of
the machine.
h) All repairs and replacement of parts must be carried out by an authorized RURIS service center.
i) Never operate the tractor with worn or damaged parts. Defective or worn parts should always be replaced,
not repaired. Only original RURIS spare parts must be used.
Training:
a) Always wear safety shoes and long pants when working. Do not use the machine when you are barefoot.
Wear hearing protection and protective gloves.
b) Carefully inspect the area where the equipment will be used and remove all objects that can be thrown from
the machine.
c) WARNING - Gasoline is highly flammable:
- store fuel in specially designed containers.
- refuel outdoors only and do not smoke while refueling.
- add fuel before starting the engine. Never remove the tank cap or add gasoline while the engine is running or
when the engine is hot.
- if gasoline has been spilled on the machine, do not try to start the engine, move the machine away from the
spill area and avoid creating any source of ignition until the gasoline vapors have evaporated.
- make sure the tank cap seals tightly when tightened. If it is damaged, replace it.
d) If the muffler is damaged, replace it.
e) Before use, always visually check the component parts of the machine. Replace worn or damaged elements
and screws.
Operation:
a) Do not start the engine in enclosed spaces where dangerous carbon monoxide vapors may accumulate.
b) Work only in daylight or in areas with good artificial light.
c) Do not park the machine on a slope.
d) Be extremely careful when changing direction on slopes.
e) When working on a slope, keep the fuel tank slightly above half to minimize the risk of fuel spillage.
f) Use extreme caution when operating the machine in reverse.
d) Do not detach, disable, remove or modify installed safety systems/micro switches.
h) Do not put your hands or feet near or under the moving parts of the machine.
i) Stop the engine before refueling or when leaving the machine.
j) Do not block machine levers or controls. Before use, make sure they are working properly.
k) Do not use other types or sizes of tires than those recommended by the manufacturer.
l) All operations related to maintenance, adjustment and service must be carried out with the engine of the
machine stopped.
m) Do not tilt or overturn the machine.
n) Pay special attention to sloping terrain and take extra care to prevent overturning or loss of control. The
main reasons for loss of control are:
- Insufficient wheel grip.
- The speed is too high.
- A sudden change of direction.
- Insufficient braking.
o) When moving away from the tractor and when inspecting the tractor be sure to turn off the engine and
remove the ignition key to ensure that all moving parts have come to a complete stop.
p ) If the machine starts to vibrate abnormally: check for possible damage; Check and tighten any loose parts.
q) Do not touch engine parts and areas that heat up during operation. There is a risk of burns.
r) To avoid fire hazards, do not leave the machine in tall grass while the engine is running.
3