Removing And Replacing The Front Control Panel; Installation In The Radio Slot - Renkforce Dab-Rcd3038 Bedienungsanleitung

Mechanical Installation

Removing and Replacing the Front Control Panel

The front control panel can be removed to prevent theft.
• Before you remove the front control panel, press the
• Press the button
• Remove the front control panel and put it into the supplied protective cover.
• To attach the operating unit, insert the right side of the operating unit in the holder so that the latches at the right
edge catch in the guides at the operating unit. Then press the left side of the operating unit to latch it.
• Do not press on the display or the buttons.


Installation in the Radio Slot

• Remove the two safety screws of the CD drive.
48
Downloaded from www.Manualslib.com
(3) to unlatch the operating panel.
Make sure to place the front operating unit on the device in the correct direction.
Do not press the front against the unit too hard. It can be easily attached by pressing it slightly against
the device at the left until it latches.
When you remove the front control panel, please put it into the supplied protective cover.
manuals search engine
Operating Instructions

English
button (2) to turn the product off.