Button Functions - Renkforce Dab-Rcd3038 Bedienungsanleitung

Operation

Button functions

• BND/LOU/ENT button (6)
With this button you can select the band range of the FM radio unit. There are 3 FM and 2 MW areas available:
F1 > F2 > F3 > AM1 > AM2

•  (15) and  (5) buttons
With these buttons the receiving frequency can be changed to adjust stations in radio operation.
Briefly pushing a button starts the automatic station search (display shows SEARCH).
The auto-scan only stops at the next station that can be received well.
By pushing a button longer, you activate manual station scan.
The display shows MANUAL.
In this mode, the frequency is changed until you release the corresponding button again. Brief pushes of this button
changes the frequency step by step.

• Station buttons 1-6 (26)
If you briefly push these buttons, you can select a station you have pre-set.
If you want to store a station you are listening to, simply push the desired button for more than 1 second.

62
Downloaded from www.Manualslib.com
On each of the band ranges, 6 stations can be stored on the station button 1-6 (26).
If buttons are not pressed for a longer period of time, the devices switches back to automatic station
search. The display shows AUTO.
Every one of the three FM ranges (F1-3) and the AM reception ranges (MW1-2) has six station buttons.
Therefore you can assign 30 station buttons.
manuals search engine
Operating Instructions

English