7 Assembling the Trimmer
3
5
6
► Take out the screws (6).
► Remove the barrier bar (1), loop handle (3) and clamps (4
and 5).
► Take the nuts (2) out of the barrier bar (1).
7.3
Mounting and Removing the Deflector
7.3.1
Mounting the Deflector
► Switch off the trimmer, push retaining latch to position
and remove the battery.
1
2
The line limiting blade (1) is already installed in the deflector
(2) and must not be removed.
0458-709-9621-A
1
2
4
3
2
► Push the deflector (2) into the guides on the housing as far
as stop.
The deflector (2) is tight against the housing.
► Insert and tighten down the screws (3) firmly.
7.3.2
Removing the Deflector
► Switch off the trimmer, push retaining latch to position
and remove the battery.
1
► Take out the screws (2).
► Pull off the deflector (1).
7.4
Mounting and Removing the Mowing Head
7.4.1
Mounting the Mowing Head
► Switch off the trimmer, push retaining latch to position
and remove the battery.
1
2
3
4
English
2
1
4
53