Mounting The Barrier Bar; Mounting And Removing The Deflector - Stihl FSA 90 Gebrauchsanleitung

English
9
► Push the tube (9) into the retainer (10).
The bike handle (2) need not be removed again.
FSA 90 R
► Switch off the trimmer, push retaining latch to position
and remove the battery.
► Fit the clamp (4) in the loop handle (3).
► Place the loop handle (3) with clamp (4) on the drive tube
(5).
► Fit washers (2) on the screws (1).
► Hold the clamp (6) against the drive tube (5).
► Insert screws (1) through holes in loop handle (3) and
clamps (4 and 6).
► Fit and tighten down the nuts (7) firmly.
52
10
1
2
3
4
5
6
7
7.2

Mounting the Barrier Bar

The barrier bar can only be mounted in combination with the
loop handle.
► Switch off the trimmer, push retaining latch to position
and remove the battery.
1
► Insert nuts (2) in the barrier bar (1) so that the holes line
up.
► Fit the clamp (5) in the loop handle (3).
► Place the loop handle (3) with clamp (5) and barrier bar (4)
on the drive tube (6).
► Hold the clamp (7) against the drive tube (6).
► Insert and tighten down the screws (8) firmly.
7.3

Mounting and Removing the Deflector

7.3.1 Mounting the Deflector
► Switch off the trimmer, push retaining latch to position
and remove the battery.
7 Assembling the Trimmer
3 4
2
5
6
7
8
0458-709-9821-B