Know Your Product - Ryobi Rag950-125 Originalanleitung

■ Ensure that the wheel is fitted in accordance with this
manual.
■ Ensure that the grinding wheel is correctly mounted
and tightened before use and run the product at no-
load speed for 30 seconds in a safe position. Stop
immediately if there is considerable vibration or if other
defects are detected. If this condition occurs, check the
tool to determine the cause.
■ Do not use separate reducing bushings or adapters to
adapt large hole grinding wheels.
■ Check that the workpiece is properly supported.
■ Use only grinding wheels approved by RYOBI.
■ Ensure that sparks resulting from use do not create
a hazard, e.g., do not hit people or ignite flammable
substances.
■ Always use protective safety glasses and ear protectors.
■ Use other personal protective equipment, such as
gloves, apron, and helmet, when necessary.
■ Never place the product on the floor or other surfaces
while it is running. Grinding wheels continue to rotate
after the product is switched off. Never touch the wheel
or place it on the floor or other surfaces while it is
rotating.
■ Use the product only for approved applications. Never
use coolants or water, or use the tool as a fixed tool.
■ Grip the product securely with both hands while
operating.

KNOW YOUR PRODUCT

See page 95.
1. Guard lever lock
2. Spindle lock button
3. On/Off switch
4. Supply cord
5. Handle, insulated gripping surface
6. Auxiliary handle, insulated gripping surface
7. Wrench
8. Grinding guard
9. Operator's manual
10. Easy fix nut
11. Locking flange
12. Grinding wheel
13. Cutting disc
14. Backing flange
15. Spindle shaft
16. 2-in-1 cutting guard
MAINTENANCE
■ The product should never be connected to a power
supply when assembling parts, making adjustments,
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product from the power
supply will prevent accidental starting that could cause
serious injury.
■ When servicing, use only original manufacturer's replacement
parts, accessories, and attachments. Use of any other parts
may create a hazard or cause product damage.
■ Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken, or
destroy plastic which may result in serious personal injury.
■ Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.
■ If the power cord is damaged, it must be replaced by
an authorised service centre in order to avoid a hazard.
■ For greater safety and reliability, all repairs should be
performed by an authorised service centre.
SYMBOLS
Safety alert
Alternating current
Class II tool, double insulation
Please read the instructions carefully before
starting the product.
Wear eye protection.
Wear ear protection.
Wear dust mask.
Always operate the product with two hands.
Do not use the guard for cut-off operations.
Wear safety hand gloves.
The product is not intended for wet grinding.
Using water or other liquid coolants may
result in electrocution or shock.
Do not use a chipped, cracked, or defective
grinding wheel.
Do not dispose of waste electrical and
electronic equipment as unsorted municipal
waste. Waste electrical and electronic
equipment must be collected separately.
Waste light sources have to be removed
from the equipment. Check with your
local authority or retailer for recycling
advice and collection point. According to
local regulations, retailers may have an
obligation to take back waste electrical and
electronic equipment free of charge. Your
contribution to the reuse and recycling of
waste electrical and electronic equipment
helps to reduce the demand of raw
materials. Waste electrical and electronic
equipment contain valuable and recyclable
materials, which can adversely impact
the environment and the human health
if not disposed of in an environmentally
compatible manner. Delete personal data
from waste equipment, if any.
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
5