HOMCOM 800-293V70 Bedienungsanleitung Seite 19

EN
3. When there are ice cubes on the surface of the evaporator, but can't fall down easily,
do not use the mechanical substance to remove it by force; Only press the "ON/OFF"
button for more than 5 seconds, the unit will enter the ice melting process, after some
while, the big ice-cubes will fall down, then turn off the unit and unplug the power cord
to clean the surface of the evaporator.
4. For the water tank and ice-full detecting plate
Also the water tank and the ice-full detecting plate is very important to keep your ice
cube hygienic. Put mixture of neutral cleaner & water into a clean water jet, then
spray to all the inner surface of tank &the ice detecting plate. Wipe these surfaces as
far as possible with a clean cloth. And then, spray the surfaces with clean water,
wiping with a dry clean cloth. Then drain out the cleaned water in the water tank by
pulling out the Water drain pipe of the water tank indicating "H" in above illustration.
When all of the cleaned water has been drained out, to reinstall back the water drain
pipe of the water tank.
Suggestion: After cleaning the interior parts and install back to its respective
position, and return machine to work, discard first batch of ice.
Water
dividing pipe
Evaporator
19
Little holes of water
dividing pipe
Pull up
first
Then move out
right toward
Ice-full detecting plate
Water tank