HOMCOM 800-293V70 Bedienungsanleitung Seite 15

EN
4. When the symbol
you take out the ice.
5. Shut down the unit: During the unit making ice, press the"ON/OFF"button on the
control panel, the unit shut down and into standby mode. If you press "ON/OFF" longer
than 5S during ice making, then the unit enters the deicing process directly, this
function can help remove the ice on the ice plate. Press "ON/OFF" to shut down the
machine.
6. Timing setting: Setting range: 1-24 hours
Time shutdown: When the unit is running, it can set up the timing shutdown.
Time on: When the unit is on standby, you can set the unit with ON-TIMER.
How to set up the timing
Press the TIMER button, the default timing time is"1H"in display window, then press
"+" button to adjust the timing time you need, every time you press the "+" button, the
time add 1 hour; Press "-" button can reduce the timing time. During the process of
time adjustment. The "H" in the lower corner of the number will flash, then after 5
seconds flashing without pressing, the "H" letter will change from flashing to always
displaying, means the timer program has been completed.
In standby condition display 5H, it means the unit will start automatically after 5 hours;
In ice making condition display 5H, it means the machine will shut down automatically
after 5 hours, the "H" in the display screen indicates that the machine currently has
timing function, and the number in front will be smaller and smaller. Until it becomes
zero, the timing ends, and the machine enters the mode you need.
How to cancel timing
When the unit has a timing(the display window will display XX H), press "TIMER"
button, the timing is canceled after the number on the screen and "H" are
extinguished.
When the unit has a timing, the display area in the lower left corner will display the
timing time and the ice making setting time, and the display content will be switched
every 5S.
7. Automatic self-cleaning program. The default cleaning time is 20 minutes.
Start the self-cleaning program: After connecting all of the water pipe, plug on the
main power supply plug, then press "TIMER CLEAN" button on control panel for more
than 5 seconds, to enter the self-Cleaning program ,the symbol
display screens ， time count down area display 20M. And the "CLEAN " light will
always be on during this period, the digit window will indicate the left time, the water
pump runs for 8 minutes and stops for 3 minutes, always recycle. The total duration
time is 20 minutes for one self-cleaning program. Also when the water pump stops, the
water will supply to the water tank automatically.
Cancel the self-cleaning program: It takes about 20 minutes to complete one self-
cleaning program. When the program is over, the system will be in off-state
automatically. And also you can press the "ON/OFF" button on control panel to cancel
the self-cleaning program by force.
lights up, the machine stop working, it will work again after
15
rotate on