HOMCOM 800-293V70 Bedienungsanleitung Seite 13

EN
Unit Back View
2. Connecting the water drain pipe
Pull out the water drainage cap with black color (indicated Ⓐ in above
illustration), then connect the gray drainage pipe included in accessory, again
connect the other end of this drainage to the main water drainage pipeline.
3. Connect the water hose to the water faucet of the water main supply system
First, install the supplied water quick-connector to the water faucet by screw thread;
Second, remove the clipper from the water quick-connector, insert the another end of
the water hose into this quick-connector port completely, then install back the clipper,
also this step is completed.
Note: The water faucet should be supplied by the customer himself.
Important: The water pressure of main water supply system must be 0.04-0.6
MPa at least.
STEP 1:Qucik-
connector and the
water faucet
STEP 1: Remove the
tape first
Water inlet port on
the unit back
STEP 2:Screw
the qucik-
connector on the
water faucet by
the screw thread,
and remove the
clipper
Remove the
clipper
STEP 2: Insert the
water hose
Then install back
the clipper
Remove the
clipper first
First insert the
water hose inward
completely
STEP 3:Insert the
water hose
completely
Push inwards
13
White water
hose(accessory)
STEP 4:Install back
the clipper