Start-Up; Cleaning And Maintenance; Cleaning; Maintenance - Parkside IAN 271210 Originalbetriebsanleitung

Start-up

Take heed of the backstroke gen-
erated by the jet of water. Stand
firmly and hold the jet gun tightly.
You may otherwise injure yourself
or others.
• Do not release water from the
pressure washer until the pres-
sure jet brush rests on the surface
you are cleaning.
• Avoid the pressure jet brush go-
ing over free corners.
Cleaning and

Maintenance

Cleaning

Always keep the
clean. Do not use any detergents or
solvents.
• Only clean the device with a soft
brush or a slightly moist cloth.
Maintenance
The pressure jet brush does not require
maintenance.
Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts. There is a danger of

Storage

• Store the pressure jet brush in a frost-
resistant location.
pressure jet brush
injury.
Waste Disposal
and Environmental
Protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Hand the tool in at a recycling centre. The
plastics and metal parts can be separated
and recycled. Ask your Service Center about
this.
Defective units returned to us will be dis-
posed of for free.

Spare Parts Order

When buying parts for the pressure wash-
er, use the service address or fax number
given.
Please enter your machine type and the item
number of the part you are ordering.
GB
7