Before Using For The First Time; Setting The Clock; Before First Use - ZANKER ZKB 7630 Bedienungsanleitung

Before using for the first time

Remove all packaging, both inside
and outside the oven, before using
the oven.
When the oven is first connected to the
electrical supply, the display will automatically
show 12:00 and the symbol
Ensure the correct time of day is set before
using the oven.

Setting the clock:

1. While the symbol is flashing, set the correct
time of day by pressing buttons " " or " "
(Fig. 1).
The time arrow symbol will disappear about
5 seconds after the correct time is displayed.
2. As soon as the symbol stops flashing, press
button twice.
Then, proceed as described in point 1.

Before first use

Before the first use, the oven should be heated
while empty.
To do this, proceed as follows:
1. Press the button
2. Press the button
«Hot air» function
3. Set the temperature to 250°C by using the
button " ".
4. Allow the oven to run
mately 45 minutes.
5. Open a window for ventilation.
This procedure should be repeated with the
function «Top and bottom heating element» and
«Thermal grill» for about 5-10 minutes.
During this time, an unpleasant odour may be
emitted. This is absolutely normal. It is caused by
manufacturing residues.
flashes.
to switch on the oven.
twice and select the
(Fig. 2).
empty
for approxi-
Electrolux
Fig. 1
Fig. 2
7