ZANKER ZKB 7630 Bedienungsanleitung Seite 23

Pyrolytic cleaning
The oven cavity is coated with a special enamel
resistant to high temperatures.
During the pyrolytic cleaning operation, the
temperature inside the oven can reach about
500°C thus burning food residues.
For your security, during the pyrolytic cleaning
operation, the oven door automatically locks when
the temperature inside the oven approaches about
500 °C. 300 °C has been reached.
Upon completion of the cleaning operation, the
oven door will be locked until the oven cavity has
cooled down.
The cooling fan operates during cooking until
the oven has cooled down. After cooking, it is
advisable to remove all the food residues with a
wet sponge.
However, from time to time, it will be necessary
to do a more complete and thorough cleaning, using
the pyrolytic cleaning function. You can select two
different levels of pyrolytic cleaning depending on
how dirty the oven is.
If the oven cavity is not very dirty, we recommend
that you select the pyrolytic 1 function (P I) in the
programmer display.
It is advisable to wipe the oven over with a soft
sponge soaked in warm water after each pyrolytic
cleaning cycle is carried out.
If the oven cavity is very dirty, we advise you
to select the pyrolytic 2 function (P 2) in the
programmer display.
During the pyrolytic cleaning function, it is not
possible to use the oven for 2 hours when selecting
the Pyr 1 function and up to 2 1/2 hours when the
Pyr 2 function is active.
The Pyro reminder recommends that a
pyrolytic cleaning function should be
carried out after several baking and
roasting processes and depending on
dirty the oven is. An acoustic signal will
be heard and the indication
displayed for approx. 15 seconds and
then a second acoustic signal can be
heard.
Depending on how dirty the oven is,
select the most suitable pyrolytic cleaning
function.
For as long as no complete cleaning
function is carried out, Pyro reminders
are displayed each time the oven is
switched off.
Electrolux
Pyro
is
23