Something Not Working - ZANKER ZKB 7630 Bedienungsanleitung

Electrolux

Something Not Working

If the appliance is not working correctly, please check the following before contacting the Electrolux Service Centre:
PROBLEM
The oven does not switch on.
The internal oven light does not
come on.
It takes too long to cook the dishes
or they cook too quickly.
Steam and condensation settle on
the food and in the oven cavity.
The oven fan is noisy.
The error code „
digits appears on the control panel.
The display shows „
32
SOLUTION
F
" followed by
12.00
".
Press the button
function.
or
Has the fuse in the domestic electrical installation been
tripped?
or
Is the child lock for the oven or the automatic
deactivation active?
or
Was the Demo mode accidentally activated?
or
Check whether the appliance is correctly connected
and the socket switch or the mains supply to the oven
is ON.
Press the button
function.
or
check the bulb and replace if necessary (see
"Replacing the oven light").
Adjust the temperature if necessary,
or
follow the advice contained in these instructions,
especially the section "Using the oven".
Leave dishes inside the oven no longer than 15 -
20 minutes after the cooking is completed.
Check that shelves and bakeware are not vibrating
in contact with the oven back panel.
Please take note of the error code and pass to our
nearest Customer Service office.
Set the time of day (see chapter "Setting the clock").
and then select a cooking
and then select a cooking