ZANKER ZKB 7630 Bedienungsanleitung Seite 24

Electrolux
How to use the pyrolytic cleaning
function
Before activating the pyrolytic
cleaning function, remove any
excessive spillage and make sure
that the oven is empty. Do not leave
anything inside it (e.g. pans, grids,
baking tray, drip pan, etc.) as they
could become severely damaged.
Ensure that the oven door is closed
before activating the pyrolytic
cleaning function.
When the pyrolytic cleaning
function is on, it is advisable not to
use the hob as this could cause
overheating and damage the
appliance.
During the pyrolytic cleaning cycle
the oven door becomes very hot.
Children should be kept away until it
has cooled.
Choose this function to clean the oven by
pyrolysis.
The following pyro levels are available:
Pyrolytic 1 (P I), Time: 2 hours. = 30 mins
Heating-up +1 hour. at 480 °C + 30 mins Cooling
down time.
Pyrolytic 2 (P 2), Time: 2 hours. 30 mins. =
30 mins Heating-up +1 hour. 30 mins. at 480 °C
+ 30 mins Cooling down time.
The pyro duration time cannot be changed.
Before performing the pyrolysis, all side
rails must have been removed.
24