ZANKER ZKB 7630 Bedienungsanleitung Seite 25

To activate the pyrolytic cleaning function
proceed as follows:
1. Using the button
Press the button
until the Pyro function symbol
- P I) appears in the display (Fig.) 18).
and the symbol
Pyro flashes in the display at the same time
and an acoustic signal is emitted (Fig. 19).
This means that, before activating the
pyrolytic cleaning function, you have to
remove all the oven accessories and the side
rails from the oven cavity.
2. The "Cooking time" symbol
5 seconds; during this time, press the button
' ' or ' ' to select the pyrolytic 1 (P I) or
pyrolytic 2 (P 2) function (Fig. 20).
3. Once you have chosen the desired pyrolytic
function, Pyro will flash in the display waiting
for confirmation to start the pyrolytic cleaning
function.
4. To confirm the desired pyrolytic cleaning
function, press the button
Pyro stops flashing and the symbol
will disappear, the acoustic signal will stop, the
oven lamp will switch off and the pyrolytic
cleaning cycle starts (Fig. 21).
As soon as the temperature in the oven
increases, the thermometer symbol
switch on the oven.
as often as necessary,
(level 1
and the indicator
will flash for
. The display
Electrolux
Fig. 18
Fig. 19
Fig. 20
25