Demo Mode - ZANKER ZKB 7630 Bedienungsanleitung

Electrolux
Fast heat-up function
After a cooking function and the temperature
have been selected, the cavity will gradually heat
up until the selected temperature is reached. This
will take from 10 to 15 minutes, depending on the
selected function and temperature.
If it is necessary to reach the required tempera-
ture in a shorter time, the "Fast Heat Up" function
can be used.
Switch the oven on by pressing button
1.
2. Set the required cooking function and tem-
perature as explained in the previous pages.
3. Set the temperature by pressing button " " or
" ". The temperature will appear in the display.
4. Press the buttons
will show "FHU" (Fig. 14).
5. Press the buttons
for approximately 10 seconds. Now it is
possible to select the required temperature. To
do this, press the button " " or " ".
6. When the required temperature is reached,
the electronic control beeps for a short time,
and the temperature display reverts to the
selected temperature.
This function can be used with any cooking
function or temperature.

Demo mode

This mode is intended to be used in shops to
demonstrate the oven functionality without any
power consumption except the interior light, the
display and the fan. This function can only be
switched on when the appliance is first
connected.
If there is a power failure, when the power
supply is restored again the Demo function can
only be switched on if, in the display, 12:00 and
the symbol are flashing automatically.
1. Press the button
A short acoustic alarm will be heard.
18
. The temperature display
°
The symbol " " will flash
for approx. 2 seconds.
.
Fig. 14