Storage; Troubleshooting - Cleanmaxx PC-U001 Gebrauchsanleitung

EN

Storage

• Flip up the motor unit so that it engages and the vacuum cleaner is upright.
• You can place the combi or upholstery nozzle onto the holder on the housing of the
motor unit for storage.
• Store the vacuum cleaner in a cool, dry indoor room out of the reach of children and
animals.

Troubleshooting

If the device stops working properly, fi rst check whether you are able to correct the prob-
lem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem
The device generates no
suction.
Low suction force.
Dust escapes from the
device during cleaning.
The dust container
cannot be inserted.
The operating lamp
does not light up when
the charging station is
connected to the mains
power.
Unusual odour
28
Possible cause/solution
• Is the battery fl at? Recharge it.
• Check the fi t of the dust container and correct it if nec-
essary. The device will not work if the dust container is
not correctly engaged in place.
• Is the dust container full? Empty it.
• Is the HEPA fi lter heavily clogged up? Clean it.
• Is the suction opening/nozzle blocked? Switch off the
device and remove the blockage.
• It is also possible that some items will be too big /
heavy to be picked up by the device.
• Is the dust container not closed correctly? Correct this.
• Is the cyclone insert or the HEPA fi lter heavily clogged
up? Clean the dust container, cyclone insert and fi lter.
• Is the lid correctly attached to the dust container? The
dust container must be closed correctly to allow it to
be inserted.
• Is the mains adapter inserted correctly in the plug
socket and is it connected correctly to the charging
station?
• Is the plug socket defective? Try another plug socket.
• Check the fuse of your mains connection.
• A new odour is normal when the device is used for the
fi rst time; it disappears after a while.
• Is the cyclone insert or the HEPA fi lter heavily clogged
up? Clean the dust container, cyclone insert and fi lter.