Monitor And App Connectivity - Fluid Apollo Plus Bedienungsanleitung

Blurtooth Monitor Operation
..........................................................................................................................................................
Auto Start: Commence rowing to activate.
Reset all values: Press and hold RESET button for 3 seconds.
Distance: Each single press of RESET adds 100m distance, up to 1000m then adds 500m.
Auto-Pause: A temporary halt in exercise will result in the following:
For over 5 seconds and under 5 minutes:
A) SPM/500METER/WATT to zero.
B) Distance/TIME values are saved.
C) CAL per hour defaults to Total CAL.
D) A Resumption in exercise in less than 5 minutes will resume Distance/TIME from saved values automatically.
Auto Power Down: Over 5 minutes. All values revert to zero after restart.
CAL HOUR: Calories burned per hour at the current Watts. Shows total calories burned when exercise is stopped.
DISTANCE: Updated every second.
LEVEL:Use the UP/ DOWN buttons to align the level with the same level selected on the Fluid Tank Resistance
Adjuster handle for accurate Distance/ CAL/WATTS.
BLUETOOTH CONNECTIVITY: Each Rower is fitted with the most advanced Monitor technology, enabling Bluetooth
connectivity with any compatible smart device. Designed to integrate with rowing and fitness apps, the Monitor will assist
with effective training progression, capturing and comparing data for the competitive individual. Including FLUID Rowing
APP available via FLUID Website. It is compatible with 3rd party APP and Software Update via Bluetooth.
NOTE: Heart Rate Chest Strap and Touch Heart Rate Handle is sold separately.
BATTERY WARNING: To prevent batteries from leaking, remove them from the Monitor if you plan on not using the
equipment for more then 30 days.
WARNING:Heart rate monitoring systems may be inaccurate, Over exercising may result in serious injury or death. If you
feel faint stop exercising immediately and seek professional medical advice.

Monitor and APP Connectivity

..........................................................................................................................................................
TIME: Auto start elapsed time.
500M TIME: Time to row 500 meters.
BLUETOOTH Signal:
On - Bluetooth connected.
Flashing - Waiting for Bluetooth pairing.
Off - Not connected; to connect, press Reset for 3 seconds.
PULSE: Compatible with Polar H7,H10 Chest Strap and FLUID Touch Heart
Rate Handle (Optional).
Heart Rate Signal:
On - Heart rate divice connected.
Flashing -Waiting for heart rate device pairing. The Monitor will automatically
pair with the nearest Bluetooth heart rate device. When pairing is complete,
the Monitor will begin to display the heart rate.
Off- Not connected; to connect, press Reset for 3 seconds.
SPM: Strokes per minute updated each stroke.
WATT: Unit of power updated per rowing stroke.
1. Download the "Fluid Connect" App on the [App store] or [Google Play].
2. While the Monitor is ON, the Bluetooth will start scanning to link to the
Phone/Pad.
3. Turn on the FLUID CONNECT app in you phone.
4. Push any work out icon, the APP will search the available Monitor near
by.
5. Choose the Monitor that you wish to link.
6. After the Monitor link to the APP, the display of the Monitor will only
show BT on the screen.
13