Inserting The Battery - Greencut Rlm610Xe Bedienungsanleitung

INSERTING THE BATTERY

Open the battery cover, insert the battery, and close the
cover.
INSTALLING THE REAR CHUTE
1. Set the machine to the lowest gear.
2. Insert chute 1 deeply into the grass catcher.
3. Hold down the side cover switch and lift the
side cover.
4. Attach chute 2 to the bayonet.
5. Hang the two tension springs on the mower
deck.
6. Connect chute 1 to chute 2 and hang the
rubber on the side of the discharge chute.
7. Release the side discharge cover to secure the
chute in position.
NOTE: The machine must be stopped during installation.
ASSEMBLING THE SIDE DISCHARGE CHUTE
1. Set the machine to the lowest gear.
2. Hold down the side cover switch and lift the
side cover.
3. Attach the side discharge chute to the
bayonet.
4. Release the side discharge cover to secure the
chute in position.
NOTE:
stopped during installation.
The machine must be
Chute 1 Chute 2
149
EN