Tire Pressure; Service Information - Greencut Rlm610Xe Bedienungsanleitung

CHECKING BATTERY PACK AND CHARGER
NOTE: Damp areas can cause corrosion of the terminals and electrical contacts. If stored for
extended periods at high temperatures (120°F/50°C), permanent battery damage may occur.
• Check the battery terminals and electrical contacts.
• Wipe with a clean cloth or blow with compressed air.
After storage, normal charging may be necessary.
To check the available charge, press the battery fuel gauge button and charge if necessary.
• When not in use, unplug the charger and store it in a cool, dry place. Damp and wet areas can cause corrosion
of the terminals and electrical contacts.
• Improper storage can damage the battery and is excluded from the warranty.

TIRE PRESSURE:

Check tire pressure before you begin!
The correct tire pressure is 1.5 bar on the front wheels and 1.8 bar on the rear wheels.
NOTE: If the tire pressure is too low, the risk of damaging the valves and therefore the hoses
increases.
REPAIRS
After any repair or maintenance work, check that all safety-related parts are in place and in proper working order.
All parts that could cause injury should be kept away from children or other persons.
NOTE: In accordance with product liability legislation, we will not be liable for any damage caused
by improper repairs or the use of replacement parts other than genuine replacement parts or parts
approved by us.
Furthermore, we will not be liable for any damage resulting from improper repairs.
The same applies to accessories.

SERVICE INFORMATION

Please note that the following parts of this product are subject to normal wear and tear and are therefore also
required for use as consumables.
Wear parts*: Spark plug, air filter, fuel filter, blade, V-belt, battery, blade, tires
* Not necessarily included in the scope of delivery
165
EN