Long-Term Storage; Transport - Greencut Rlm610Xe Bedienungsanleitung

• Always store the product in a clean, safe, dry place with temperatures between 0°C and 45°C. The optimal
storage temperature is between 5°C and 30°C.
• The equipment is not weatherproof and should not be stored in direct sunlight, at high temperatures, or in humid
locations.
• To reduce the risk of fire, keep the machine clean by removing all traces of material, oil, and grease.
• For long-term storage, store the machine without fuel. Stored fuels must be stabilized with a stabilizer.
• Store the machine out of the reach of children.
• Keep the instruction manual with the tool.

LONG-TERM STORAGE

• Follow general storage procedures, including:
• Drain the fuel system. It is recommended to have the tank as empty as possible before draining.
• Unscrew (counterclockwise) the carburetor drain plug. Use a suitable container to collect the drained fuel and
allow it to drain. Store the drained fuel in an airtight container.
• Rescrew the carburetor drain plug (clockwise) and tighten it.
• Remove the spark plug and pour 30 ml of clean engine oil into the cylinder. Pull the starter rope slowly to
distribute the oil. Replace the spark plug.
• Clean the cylinder cooling fins and casing.
• Be sure to clean the entire machine to protect the paint.
• Cover the equipment to protect it from dust and dirt.
• Store the machine in a well-ventilated area.

TRANSPORT

• The ride-on mower can cause serious crushing injuries due to its own weight. Extra care must be taken when
loading or unloading the ride-on mower onto a vehicle or trailer for transport purposes.
• This mower must not be towed. For transport on public roads, a suitable vehicle or trailer must be used.
• Secure the mower in a loading area during transport.
• Always use the parking brake.
• Before transporting or storing, disengage the drive from the mower blade or attachments.
• When transporting the machine, always observe regional legislation, especially regarding load security and the
transport of objects on it.
• Allow the machine, particularly the engine and muffler, to cool completely after loading and before continuing
transport. The loading floor and the area around the mulcher and engine must be kept free of combustible
materials such as straw, leaves, or dry grass clippings. Always remove the ignition key.
169
EN