Replacing The Cutting Blades - Greencut Rlm610Xe Bedienungsanleitung

166

REPLACING THE CUTTING BLADES

CAUTION: Before performing this operation, make sure the machine is completely shut off and
disconnect the spark plug for greater safety. Remember to drain the oil from the oil tank before
removing the blade.
When changing the cutting tool, use only original spare parts.
Never install another blade.
Wear gloves to avoid cuts when changing the blade.
Remove the ignition key.
Remove the screw to replace the blade.
Install everything as described in the image.
Tighten the screw correctly. The maximum torque is 65 Nm.
Also replace the screw and washer if replacing the blade.
CLEANING THE CARBURETOR
You can watch our explanatory video.