Maintenance Operations; Safety Devices - Greencut Rlm610Xe Bedienungsanleitung

REMOVE ANY RESIDUE
• Never clean the lawnmower with a water jet or high-pressure cleaner. The engine must remain dry.
• Do not use aggressive cleaning agents such as cold cleaners or petroleum ether.
• Never drive near an edge or ditch to clean (for example, the frame) of the lawnmower.
• To avoid fire hazards, keep the engine, cooling fins, battery compartment, the area around the fuel tank, and the
exhaust free of grass, leaves, or escaping oil (or grease).
• Always clean the grass catcher.

MAINTENANCE OPERATIONS:

NOTE: Only the maintenance operations described in this instruction manual may be performed. All
other work must be performed by a specialized dealer.
Always keep warning and information decals clean and legible. If a component is replaced with a new one, ensure the
new component is provided with the same decals.
For safety reasons, fuel-carrying components (fuel line, fuel tap, fuel tank, tank cap, connections, etc.) must be
periodically inspected for damage and leaks and replaced if necessary.

SAFETY DEVICES

The machine is equipped with numerous safety devices.
• These devices must not be removed or modified (bypassed, etc.) and must be checked at regular intervals.
• Operations on safety devices must only be performed by a technician.
• Ensure that all nuts, pins, and bolts, especially the blade fixing screw, are properly tightened to ensure the
machine is in safe operating condition.
• For safety reasons, worn or damaged parts must be replaced immediately.
• Regularly check the grass catcher (e.g., the grass catcher box, the discharge chute) for wear, damage, or loss of
functionality.
CAUTION: Special care is required when working under the machine due to the weight of the
mower.
• Always keep the mower and accessories in perfect working order.
• All safety devices must be present and in perfect working order.
• Ensure the tires have the correct pressure. The tire pressures specified in the instruction manual must not be
exceeded.
• Only wear heavy work gloves and use extreme caution when working on the cutting unit.
• Check the brake function at short, regular intervals.
CAUTION: Never work on or touch live parts of the ignition unit while the engine is running.
Always remove the spark plug boot before starting any maintenance or repair work. Never perform
any work on the machine while it is running.
161
EN