Maintenance Schedule - Greencut Rlm610Xe Bedienungsanleitung

MAINTENANCE
• The engine must be turned off and cold enough to touch before performing any maintenance work.
• To keep the equipment performing at optimal efficiency, regular checks and maintenance is required. This will
ensure best performance of your machine and will extend the life of your product considerably.
• The maintenance program indicated below specifies certain preventive maintenance checks, necessary tasks and
how often they should be performed.
• Some maintenance indicated in this manual may be beyond the capacity of some users. Contact the Official
Technical Service for those procedures for which you do not feel comfortable doing or for which you do not have
the necessary tools or experience.
NOTE: Harsh operating environments such as extreme temperatures, dust, etc. may require more frequent
maintenance. Maintenance frequencies are based on general factors including a maximum use of approximately
300 hours per year. Apply common-sense when following the maintenance schedule based on your actual use of the
product. Keep reasonable records of maintenance activities for reference. Failure to follow the maintenance schedule,
using incorrect or non-compatible accessories or replacement parts, or general negligence may result in making the
product warranty void.

MAINTENANCE SCHEDULE

MAINTENANCE
Engine oil
Oil leaks
Air filter
Bullet
Valve clearance
Basic carburetor cleaning
Complete carburetor cleaning
Screws/bolts
Fuel reservoir
Fuel hoses
Fuel filter
Underbody cleaning
Cleaning traction mechanisms,
rear axle, belt accommodation
Wheel lubrication
Cleaning the rear engine
Transmission mast
Blades
EVERY
EVERY USE MONTH OR
20H USE
Check Replace
Check/repair as
needed
Check
Check/readjust as
needed
Limpiar
Grease
EVERY 3 EVERY 6
MONTHS OR MONTHS OR
50H USE 100H USE
Replace
Check/replace as needed
Check Replace
Check
Check
Replace as needed
Clean and replace as needed
Check
Check
Before and after prolonged storage of the machine.
159
EN
EVERY YEAR
OR 300H USE
Adjust as
needed
Purgar y limpiar
Check
Check