Adjusting The Seat Position - Greencut Rlm610Xe Bedienungsanleitung

148
GRASS BASKET ASSEMBLY
Hang the grass basket on the hook. Attach the basket's
plastic clips to the mower's metal frame. Make sure
these clips are fully secured to the frame.
TIRE INSTALLATION
Park the mower on a firm, level surface.
Let the mower completely shut off and apply the parking
brake to prevent the machine from moving during
installation.
Install the tires as shown in the image below and
tighten the front wheel with flange nuts. Secure the rear
wheels with washers and flange bolts. (Recommended
tightening torque: 22 Nm.)
When removing or installing tires, use a hard object under
the front and rear axles of the lawn mower to prevent it
from tipping over during the replacement process, as this
could cause personal injury.

ADJUSTING THE SEAT POSITION

CAUTION: Before using the lawn
mower, adjust the seat position to
ensure your feet can firmly press the
pedals.
To move the seat:
• Turn the key to the STOP position and apply the
parking brake.
• Sit in the seat, turn the seat adjustment lever to
the left.
• While holding the lever, slide the seat to the
desired position.
• Release the lever and ensure the seat is locked in
position before operating the lawn mower.