Control Panel Installation; Installing The Battery; Charging The Battery - Greencut GLM770XE Betriebsanleitung

84
SIDE DISCHARGE INSTALLATION
ATTENTION: Remove all grass before using your machine with the side discharge.
Lift the side discharge cover with one hand and hook the side discharge line with the other hand. Release the side
exhaust flap to secure the line in position.

CONTROL PANEL INSTALLATION

1. Place the panel on the top handlebar and fit it through the mounting hole
2. Feed the cable through the panel slot and then connect the cable to the electronic button
3. Secure the panel to the upper control bar with the screws.

INSTALLING THE BATTERY

1. Open the battery cover.
2. Insert the battery into the slot and push it into place.
3. Close the battery cover.
1

CHARGING THE BATTERY

1. Plug the charger into the power outlet, the indicator light will be green.
2. Place the battery in the charger slot. When the battery is being charged, the indicator light is red and when
the battery is charged, the light is green.
3. Once the battery is charged, remove the battery and unplug the charger.
Side discharge cover
Side discharge chute
2 3