RC ART DiaDENS-PC Betriebsanleitung Seite 126

EN
ing coffee, or tea, or food. Immediately before the procedure,
it is recommended for patient to sit in a comfortable position
and relax for about 15 minutes. Prior to the session, remove
all devices generating high-frequency electromagnetic fields
(cell telephones, pagers, high-frequency ovens, TV-sets, irons,
etc.). The patient will have to remove jewelry, glasses, and a
watch. During the examination, the patient must be seated or
reclining comfortably.
Attention! During the session, do not touch the patient with
both hands simultaneously.
Operating MiniAS mode autonomously
DENAS MS
code +7 (343)
STAND-BY
P00 F77
Attention! Only the remote electrodes designated for this
will be connected to the DiaDENS device slots. Connection of
other devices to the device slot is prohibited.
* MiniAS *
0.0 000
126
Switch the device on.
To do this, press "On" key. A sound track
will be played and manufacturer information
will appear on the screen (20 sec).
Following that, the device will go into
STAND-BY mode.
For skipping manufacturer information,
press and hold any key (except the "Off")
until "STAND-BY" appears on the screen.
Connect the diagnostic electrodes to the
slot.
To switch MiniAS diagnosis on, press si-
multaneously the "On" and "B" keys.
The patient will hold passive electrode in
his/her hand (the patient's hands must not
touch each other or cross).