RC ART DiaDENS-PC Betriebsanleitung Seite 123

recommended for patient to sit in a comfortable position and
relax for about 15 minutes.
Prior to the session, remove all devices generating high-fre-
quency electromagnetic fields (cell telephones, pagers, high-
frequency ovens, TV-sets, irons, etc.). The patient will have to
remove jewelry, glasses, and a watch. During the examination,
the patient must be seated or reclining comfortably.
Attention! During the session, do not touch the patient with
both hands simultaneously.
Operating BIOREPER mode autonomously
DENAS MS
code +7 (343)
STAND-BY
P00 F77
BIOREPER
0.0 000
Switch the device on.
To do this, press "On" key. A sound track
will be played and manufacturer information
will appear on the screen (20 sec).
Following that, the device will go into
STAND-BY mode.
For skipping manufacturer information,
press and hold any key (except the "Off")
until "STAND-BY" appears on the screen.
Connect the diagnostic electrodes to the
slot.
To switch on the diagnostic regime of
BIOREPER method, press "B" key.
The patient will hold passive electrode in
his/her hand (the patient's hands must not
touch each other or cross).
Determining of individual testing voltage.
Put the active electrode to In-Tan
point situated on the mid-line be-
tween eyebrows on patient's nose.
BIOREPER
10.0 196
Press and hold the
"POWER +" key: selec-
tion of testing voltage will
start, the voltage values
EN
123