RC ART DiaDENS-PC Betriebsanleitung Seite 116

EN
In revealing the maximal value, without breaking contact be-
tween the electrode and the measurement point and without
changing the pressure force applied to the skin, press keys
MAX= 062
>
MAX= 062
-02 >
MAX= 062
-02 > -04
VOLL:
000
Medicinal testing
The first measurement of the parameters will be performed
with no medication. Then the substance to be tested will be
placed into the contour of the passive diagnostic electrode and
the measurement will be repeated for the same points.
Attention! Do not place the samples under study into the
passive electrode without packaging them first, as it is not re-
commended to wash the electrode, whereas particles of the
sample remaining on the electrode surface will distort values of
measurements obtained in subsequent diagnosis.
Comparing the parameters obtained, we may conclude on
the fact how the substance under study affects the state of the
meridians.
If necessary, we may continue the testing a different medi-
cine.
116
"POWER +". On the screen, the maximal
value "MAX=..." will appear and then the de-
vice will perform two measurements with a 1
second interval, their values indicating dif-
ference of current and the maximal magni-
tude of electric current. The data will stay on
the screen for 3-4 seconds.
Values will be recorded in a special form
(diagnostic chart) for subsequent analysis.
Then the device will return to its initial state
and display message "VOLL": the measurement
procedure may be repeated for the next point.
It is not recommended to perform meas-
urements of the same point more than 3
times in a row as this will disturb haemody-
namics of this point leading to deviation of
the parameters: they will no longer be accu-
rate for diagnostic purposes.