RC ART DiaDENS-PC Betriebsanleitung Seite 119

Preparing for the study
Two days prior to the diagnosis procedure, it is recommend-
ed that patient avoids tonics.
On the day of the diagnosis, two hours before the proce-
dure, the patient should avoid taking coffee, or tea, or food.
Immediately before the procedure, it is recommended for
patient to sit in a comfortable position and relax for about 15
minutes. Prior to the session, remove all devices generating
high-frequency electromagnetic fields (cell telephones, pag-
ers, high-frequency ovens, TV-sets, irons, etc.). The patient will
have to remove jewelry, glasses, and a watch. During the exam-
ination, the patient must be seated or reclining comfortably.
Operating BIOVOLL mode autonomously
DENAS MS
code +7 (343)
STAND-BY
P00 F77
Attention! Only the remote electrodes designated for this
will be connected to the DiaDENS device slots. Connection of
other devices to the device slot is prohibited.
BioVOLL
Ut = ?
Switch the device on.
To do this, press "On" key. A sound track
will be played and manufacturer information
will appear on the screen (20 sec).
Following that, the device will go into
STAND-BY mode.
For skipping manufacturer information,
press and hold any key (except the "Off")
until "STAND-BY" appears on the screen.
Connect the diagnostic electrodes to the
slot.
Switch the BIOVOLL mode by simultane-
ous pressing the "On" and "V" keys.
Determining of individual testing voltage:
EN
119