RC ART DiaDENS-PC Betriebsanleitung Seite 112

EN
drowsiness, difficulty concentrating, and as preventive meas-
ure in cold and flu seasons.
It will be used once per session in a course treatment.
DENAS MS
code +7 (343)
STAND-BY
P00 F77
STAND-BY
P00 MED
justed based on patient's feelings, at the moment of the elec-
trode contact with skin surface. The pain sensitivity threshold
should not be exceeded.
Set the action power.
In switching the device on, the power value is zero.
For increasing of the power press and hold "POWER +" key.
STAND-BY
P99 MED
112
Switch on the device.
To switch the device on press the "On" key. A
sound track will be played and manufacturer
information will be displayed on the screen
(20 sec).
For skipping manufacturer information,
press and hold any key (except the "Off")
until "STAND-BY" appears on the screen.
Set the action frequency to 10 Hz.
To do this press the "FREQUENCY –" key
until appearance of "F 10" on the screen,
once more press the key "FREQUENCY –"
and MED mode will switch on.
Establish the device electrode on the HE-
GU zone.
Attention! The power control will be ad-
The power will start increasing evenly from
0 to 99 conventional units. On the screen,
the change of power from P00 to P99 will be
shown.
For decreasing of the action power press