RC ART DiaDENS-PC Betriebsanleitung Seite 121

MAX= 062
-02 >
MAX= 062
-02 > -04
BIOVOLL:
000
urements for the same point more than 3 times in a row as this
will disturb haemodynamics in this point leading to deviation of
the parameters: they will no longer be accurate for diagnostic
purposes.
Medicinal testing:
First the evaluation of energy meridian initial condition will be
performed (see above).
The first measurement of the parameters will be performed
with no medication. Then the substance under testing will be
placed in the contour of the passive diagnostic electrode and
the measurement will be repeated for the same points.
Attention! Do not place the samples under study into the
passive electrode without packaging them first, as it is not re-
commended to wash the electrode, whereas particles of the
sample remaining on the electrode surface will distort values of
measurements obtained in subsequent diagnosis.
Comparing the parameters obtained, we may conclude on
how the substance under study affects the condition of the me-
ridians.
If necessary, we may continue the testing for a different
medicine.
ond interval, indicating the difference be-
tween proceeding and maximal values of the
current. The data will be kept on the screen
for 3-4 seconds.. The value will be recorded
in a special form (diagnostic chart) for sub-
sequent analysis.
Then the device will return to its original
mode and display the message "BIOVOLL".
The measurement procedure can then be
repeated for the next measurement point.
It is not recommended to perform meas-
EN
121