RC ART DiaDENS-PC Betriebsanleitung Seite 103

trodes to the adjacent area and regard this latter area as a la-
tent trigger one, and then to move over to treatment of the next
zone.
Make records of the obtained time values in respect to the
testing action in order to reveal the latent trigger zones.
Those zones whose ТЕSТ values differ considerably from the
majority of numbers either towards increase or decrease will be
the latent trigger zones. These should necessarily be treated in
the THERAPY mode during 1-5 minutes at the frequency 60 or
77 Hz.
STAND-BY
P77 F77
5.1.2. The SCREENING mode
The SCREENING mode provides quick evaluation of the zone
condition prior to and after DENS treatment. The SCREENING
mode is intended for fast search of latent trigger zones. One
measurement of the skin surface resistance occurs within first
five seconds.
Attention! The mode is intended for fast search of latent
trigger zones rather than for diagnosing.
The action energy range: minimal or comfortable. The ope-
ration method: stable (the electrodes will be shifted after re-
ceiving the sound signal).
The SCREENING mode works at the frequency of 10 Hz.
DENAS MS
code +7 (343)
To do this press the "FREQUENCY +" key
until F60 or F77 appear on the screen and
treat the zones at the second (comfortable)
energy level.
During the operation, the built-in electrodes
only will be employed
Switch on the device.
To switch the device on press the "On" key. A
sound track will be played and manufacturer
information will be displayed on the screen
(20 sec).
EN
103