Parkside Performance PBSPA 12 E4 Bedienungsanleitung Und Originalbetriebsanleitung Seite 22

˜ Cleaning and care
WARNING!
m
Always switch the product off,
remove the battery pack
and let the product cool down
before performing inspection,
maintenance and cleaning work!
˜ Cleaning
NOTE
Do not use chemical, alkaline,
u
abrasive or other aggressive
detergents or disinfectants to
clean this product as they might be
harmful to its surfaces.
ever allow uids to get into
o
the product.
The product must always be kept
o
clean, dry and free from oil or grease.
Remove debris from it after each use
and before storage.
Regular and proper cleaning will help
o
ensure safe use and prolong the life
of the product.
Clean the product with a dry cloth.
o
Use a soft brush for areas that are
hard to reach.
In particular clean the air vents after
o
every use with a cloth and soft brush.
The vents must always be clear.
o
˜ Maintenance
Before and after each use, check
o
the product and accessories (e.g.
accessory tools) for wear and
damage. If required, exchange
them for new ones as described in
this instruction manual. Observe
the technical requirements (see
"Technical data").
20 GB
˜ Repair
This product does not contain any
o
parts that can be repaired by the user.
Contact an authorised service centre
or a similarly uali ed person to have
[ ]
it checked and repaired.
˜ Storage
Push the rotation direction switch
o
to the centre position to lock the on/
off switch
Clean the product as described
o
above.
Store the product and its accessories
o
in a dark, dry, frost-free, well-
ventilated place.
Always store the product in a place
o
that is inaccessible to children. The
ideal long term storage (longer than
3 months) temperature is between
20 and 26
Store the product in its carrying
o
bag
Battery pack advice
Only store the battery pack
o
partially charged. The battery pack
should be charged to 40 to 60 %
(red and orange charging level
LEDs
extended periods.
Check the battery pack
o
about every 3 months when storing
for extended periods. Recharge
as necessary.
˜ Transportation
Push the rotation direction switch
o
to the centre position to lock the on/
off switch
Transport the product in its carrying
o
bag
Protect the product from any heavy
o
impact or strong vibrations which
may occur during transportation
in vehicles.
.
[ 8 ]
.
.
[ ]
light up) before storing for
9 ] [
.
8 ] [
.
[ ]
[ 6 ]
[ ]
charge
[ ]
6 ] [