Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Insulation damage due to being ripped out of the wall outlet.
• Cracks due to the insulation ageing.
Check the electrical connection cables for damage regularly. Make sure
that the connection cable does not hang on the power network during
the inspection.
Electrical connection cables must comply with the applicable VDE and
DIN provisions. Only use connection cables with the marking „H05VV-F".
The printing of the type designation on the connection cable is mandatory.
AC motor
• The mains voltage must be 230 V~
• Extension cables up to 25 m long must have a cross-section of 1.5
mm
.
2
Connections and repairs of electrical equipment may only be car-
ried out by an electrician.
Please provide the following information in the event of any enquiries:
• Type of current for the motor
• Machine data - type plate
• Motor data - type plate
14. Disposal and recycling
The equipment is supplied in packaging to prevent it from being dam-
aged in transit. The raw materials in this packaging can be reused or re-
cycled. The equipment and its accessories are made of various types of
material, such as metal and plastic. Never place defective equipment in
your household refuse. The equipment should be taken to a suitable col-
lection center for proper disposal. If you do not know the whereabouts
of such a collection point, you should ask in your local council offices.
GB | 49
www.scheppach.com
Werbung
