tell Gate Control PRO 20 Schnellinstallationsanweisung Für Installateure Seite 7

Gate Control PRO - DIN rail – Quick Guide
-> Chapter 3, 5.2.4 and 5.2.8 of the Installation and Application Manual.
STATUS AND GSM LED SIGNALS:
Slowly flashing green
Flashing red
Permanent red
Permanent ON
200ms ON, 200ms OFF
800ms ON, 800ms OFF
Permanent OFF
PROGRAMMING SOFTWARE:
The latest version of the programming software is available on the
manufacturer's website.
Connecting via USB
- Launch the Gate Control programming software.
- Power up the device and then connect it to the computer using a
USB-A to USB-C cable.
- Select the USB
- Enter the USB connection password (default password: 1234), and then
click on the Connect
- To configure the settings, reading the settings stored in the device is needed,
which is done automatically after connecting to the device. However, you can
also read the settings manually anytime by clicking on the Read settings
button in any submenu under the Device settings menu group.
- Configure the settings as needed, and then write the changed settings into the
device by clicking on the Write settings
Normal operation, connected to the mobile
network
The mobile service is unavailable,
or system startup/restart is in progress
SIM card error
Searching for network
Data transmission
Registered on the network
Modem powered off
:
option in the Connection type menu.
button.
button.
7