Programming Software - Tell 4G.in6.R2 Kurzleitfaden Für Installateure

PROGRAMMING SOFTWARE:

The latest version of the programming software is available on the
manufacturer's website.
Permission levels:
The product uses different user levels. The superadmin authorization level used
during the installation has full access to all settings in the device.
Default superadmin password: 1234
For more information on the permission levels, see the Installation and
Application Manual of the product.
Attention! It is highly recommended that you change the default passwords
after the first login. This can be done using the password icons in the
Connection type menu.
Connecting via USB
 Open the Smart Module MINI programming software.
 Power up the device and then connect it to the computer using a
USB-A to USB-C cable.
 Select the USB
 Enter the Device password (default password: 1234), and then click on the
Connect button.
 To configure the settings, first you must read the settings stored in the device
by clicking on the Read
menu group.
 Configure the settings as needed, and then write the changed settings into the
device by clicking on the Write
PIN-code, APN, and Cloud:
The mobile app and remote access work through cloud service. You can enable
or disable Cloud usage in the General settings menu (enabled by default).
The device attempts to set the APN automatically from the provider. If this fails
(the device does not get an IP address), configure the APN manually in the
General settings menu (the APN is available on the provider's website).
When left blank, the device will use automatic APN setting (restarting the device
is necessary after changing the APN settings). You can check the IP address in
the Status monitoring menu.
:
option in the Connection type menu.
button in any submenu under the Device settings
button.
4