tell Gate Control PRO 20 Schnellinstallationsanweisung Für Installateure Seite 11

Gate Control PRO - DIN rail – Quick Guide
Configuring cameras:
The Gate Control PRO can manage access to up to two IP cameras via ONVIF
protocol. They can be added in the IP cameras menu, by entering the URLs of
the cameras. You can enter either stream or snapshot URLs, and the mobile
application will display the camera images accordingly.
To extract the URL from your IP camera, we suggest using our IP camera
detector software designed for this purpose. The software is available on our
website in the downloads, on the Gate Control PRO – DIN rail product page.
-> Chapter 5.2.4, 5.2.5, 5.2.6, 5.2.8 and 5.2.10 of the Installation and Application
Manual.
REGISTERING THE DEVICE IN THE MOBILE APP:
The device can be used with the
Gate Control
application. The mobile application
is available on
platforms (see the QR codes on
the right):
Minimal system requirements:
- Android: 8
- iOS: 12
By registering the Gate Control PRO device in the mobile application, besides
the mobile device, the user will also be added automatically in the device.
Thereafter, user permissions can be changed via the programming software,
or even via the mobile app by admins or super admins. If a user has been added
in the device via the programming software before registering his mobile app, for
the mobile app registration the user should use the username added in the
programming software. Otherwise, a new user will be created upon registering
the mobile app.
PRO mobile
the following
11