tell Gate Control PRO 20 Schnellinstallationsanweisung Für Installateure Seite 9

Gate Control PRO - DIN rail – Quick Guide
You can register a new user with full access to remote programming and disable
the default superadmin access by adding a user with Super admin role, and
a remote access password for that user. New users can either be added through
the mobile app registration, which will be discussed later in this guide, or in the
Users menu as follows:
- Add a new user by clicking on the Add new
- Type in the user's Username and Phone number.
- Set the Role to Super admin, configure the Permissions as needed, click on
the OK button when finished, and then click on the Write users
write the user into the device.
- Select the Remote access menu, and then click on the Add new
to configure a password for remote access.
- Select the User from the drop-down menu and enter the Password that you
want to use when signing in for remote programming, and then click on the OK
button.
- Click on the Write users
All data can be changed later, except the username. If you need to change the
username, you must delete the user and add it again. Please note that deleting
a user will delete all mobile devices added to that user.
Configuring a system administrator:
In most applications, a separate administrator is needed for managing users in
the Gate Control PRO. You can add administrators by following the steps
specified above but choosing the Admin option for Role. Besides the super
administrator, the administrator can also add and delete other users remotely.
If users with Admin role have also been added in the system, hereinafter the
system will send all user related notifications to these administrators. This serves
to relieve the super admin.
For a detailed explanation on user management, please read the Installation
and Application Manual.
Registering the device identifier:
The device can be identified and accessed remotely based on its unique device
identifier. You can read and copy the device ID to clipboard in the Status
monitoring menu.
You can store the device contact details (name, device identifier, comments)
using the Add new
to easily connect to the device remotely.
button to update the settings in the device.
button in the Device register menu, which enables you
9
button.
button to
button