tell Gate Control PRO 20 Schnellinstallationsanweisung Für Installateure Seite 13

Gate Control PRO - DIN rail – Quick Guide
Registration steps:
- Open the mobile app and go to the main menu
- Choose the Add new device
- Tap on the Scan QR code
requiring approval. You can get the QR code from the system administrators,
or read it from the programming software, in the Mobile devices menu, after
clicking on the QR code
registration requiring approval tab.
- Enter your Username and Phone number.
- Tap on the Next button.
- Wait for the administrators to approve your registration. When approved, you
will receive a Push notification.
- Tap on the notification. This will open the mobile app and will add the new
device to the main screen.
KEY FUNCTIONS OF THE MOBILE APPLICATION
You can access the gate related functions by selecting the icon of the gate on
the Main screen
appear along with the settings
and the icon of the gate or delete
button to refresh the settings if any changes were made in the meantime in the
Gate Control PRO device.
IP camera test:
You can test if the application works properly with your IP cameras. For this,
open the main menu
URL of your IP camera, and then tap on the Start test
FURTHER IMPORTANT
SOFTWARE:
Administrator e-mail address:
For receiving and initiating firmware updates remotely, enter your e-mail in the
Administrator's e-mail address field in the General device settings menu of
the programming software.
option.
button and read the QR code for app registration
button and selecting the QR code for app
. When selected, the camera
button, which enables you to change the name
, select the IP camera testing
SETTINGS
.
and the control
the gate if needed, or use the update
IN THE
13
buttons
option, enter the stream
button.
PROGRAMMING