Registering The Device In The Mobile App - Tell 4G.in6.R2 Kurzleitfaden Für Installateure

REGISTERING THE DEVICE IN THE MOBILE APP:

The device can be used with the
TELL Control Center mobile
application.
The mobile application is available
on the following platforms (see the
QR codes on the right):
Minimal system requirements:
- Android: 8
- iOS: 12
For app version 1.8.0
You can register up to 4 mobile devices in the Smart Module MINI. There are
4 registration slots in the programming software with a different QR code for each
registration.
Preparing the Smart Module MINI for registration:
 Open the programming software, connect to the device, and read the settings
from the device by clicking on the Read
 Make sure that the Cloud usage option is enabled in the General settings
menu, and that the device is connected to the cloud (you can check this in the
Status monitoring menu).
 Configure a Registration password in the Mobile devices menu for the
memory slots where you want to register a mobile device.
 Write the changed settings into the device by clicking on the Write
 Click on the QR code
memory slot from the Mobile device drop-down menu, where you want to
register a mobile device. The software will show the QR code that belongs
to the selected registration slot. You can read the QR code directly from the
PC screen, or print or save to file and send over by e-mail if needed.
Registration:
 Open the mobile app, tap on the Scan QR code
the QR code. If you already have a registered device in the app, go to the
menu and choose the Add new device
 Enter a chosen Username (this identifies the app in the Smart Module MINI).
 Enter the Registration password configured in the programming software.
 Tap on the Next button.
 Enter a chosen Device name (identifies the Smart Module MINI in the app).
 Tap on the Next button.
 The device will be added automatically on the main screen.
button in the Mobile devices menu and select the
8
button.
button and read
option.
button.