Clean Air Optima RVC-002B Smart Gebrauchsanweisung Seite 24

Troubleshooting
The following is a troubling shooting guide to help you solve any issues that you may have
using the Clean Air Optima® robot vacuum cleaner RVC-002B Smart.
Problem
The mop is dirty.
Anti drop sensor
detects no abyss.
Robot vacuum cleaner
jammed.
Indicator light self empty
station flashes red.
The indicator light of the
dust bin is still flashing
red after replacing the
dust bag.
WARNING!
If the above recommended solutions do not work, please contact Clean Air Optima® technical
support at the telephone number for your region. Do not attempt to disassemble, reassemble,
or repair the device as this may void the warranty.
24
• The mop may be washed at a maximum of 40 degrees by hand
or in a washing machine.
• Do not put the mop in a dryer afterwards.
• Clean all the sensor on the bottom. Check bottom view for the
position of the sensors.
• Check if the entrance to the dustbin is blocked.
• Install the dustbag.
• Clean the dust tunnel.
• Replace the dustbag.
• Clean the dust tunnel.
• Check if the dustbag has been installed correctly.
Solution