Clean Air Optima RVC-002B Smart Gebrauchsanweisung Seite 19

Clean the chargingpoints and the charging poles with a clean, dry cloth, before charging.
Clean the charging points
Maintenance / cleaning self emtpy station
Replace the dustbag.
When the dust bag is full, the red light on the self empty station flashes.
Replace the dust bag in time.
The green light illuminates if the dust bag is not full.
Open upper
cover.
Cleaning the self empty station
1. If the indicator light of the dust bin is still flashing red after replacing the dust bag, it is
recommended to unplug the power cord, turn the self empty station over, and check if there
is anything blocking the dust tunnel or suction port.
2. If the dust tunnel is blocked, refer to the following figure to remove the transparent cover of
the dust tunnel to clean it.
3. Assemble it after cleaning.
Transparent cover
Dust path
Pull up the bag
handle and take
out the bag.
Clean the charging poles
Throw away the
old dust bag.
Put in a new dust
bag and cover it.
19