Clean Air Optima RVC-002B Smart Gebrauchsanweisung Seite 11

Installation instruction robot vacuum cleaner
1. Remove the bumper protective strip.
3. Install the dust container side cover:
Press the side cover firmly into the
indicated position as shown in the figure.
5. Install the dustbin inside the robot vacuum cleaner.
2. Install the side brushes. Make sure that the left
side brush (L) and the right side brush (R) match
L and R on the lower housing and press the side
brushes onto the mechanism.
They are installed when you hear a "click" sound.
4. Close the side cover of the dust
container: turn the side cover of the
dust container as indicated by the
arrow.
11